Windows cmd change drive letter

There is also the risk that any software you install on a drive will cease functioning once you change the letter of that drive.

This is not a probability but it's still a possibility, so be wary of doing that. On the bright side, at least the problem is more common with older software. What about the reasons you should change your drive letter? Say you purchase an external drive and wish to change its drive letter, right? And you're doing this because you already have another drive with the same letter as the external.

You can easily do all this without having to resort to complex instructions, and that is very convenient. This freedom to customize your storage devices the way you want is also a welcome addition to computer usage. Assigning letters in alphabetical order to drives is a simple way to keep them organized.

It benefits you because it will be easier to know what files or programs are installed on which drive. You don't have to waste precious time by going through random locations to find your files.

The first thing you need to know here is this: You cannot change the drive letter of the drive where your Windows is installed on. The only way for you to do that is to do a clean install of the Windows itself; but why go through all that trouble just to change a simple letter? With that being said, and except for your operating system's default drive, you have much leeway when it comes to changing drive letters.

Even though Windows automatically assigns a drive letter to any external storage device you connect to it, there are unique occasions where it tries to give an already-assigned letter to a new drive.

It thus nullifies the action and prevents the drive from showing up in "File Explorer. Kicking off the tutorial will be "Disk Management. When the "Run" window pops up, type this command in its search field: diskmgmt. You will see a list of drives in the "Disk Management" window.

Pick out the one you want to change the letter of, then right-click on it and select "Change Drive Letter and Paths. Right beside the "Assign the following drive letter" option, you will see a drop-down menu. Select the drive letter you want Windows to give the storage device from this menu. Click on "OK" and select "Yes".

Close "Disk Management" and your drive will now be bearing a brand-new letter. Click on "command prompt". After the command prompt opens up, right-click on it, and select "Run as administrator.

Type diskpart in the command window and hit "Enter", then type list volume and press "Enter" again. You will see a list of simple volumes under "Volume.

One of them will be the drive you want to assign a new letter. Knowing which of them is the drive shouldn't be too hard.

Just look at each of their corresponding sizes under the "Size" category. And that's it. Close the "command prompt" tool and restart your PC and you should see your drive rocking the new letter you just assigned to it. Press the "Windows" key and type "Windows PowerShell" in the search bar. Right-click on the program in the search results and choose "Run as administrator. Type Get-Disk in Windows PowerShell to identify the particular hard drive you want to assign the new drive letter to.

Press "Enter. Take note of this: In the command up there, replace "1" with the disk number of the drive to be formatted; the letter "G" in the same command represents the drive letter to be assigned to the drive, so you can change it to the letter you prefer. You are in the right place.

This task can help a lot to better organize your devices and to better remember what content is stored on each of them. The procedure is very simple and you can do it in two ways. Then type cmd and press Enter to access Command Prompt. Step 2 : In Command Prompt, input diskpart and press Enter to launch diskpart. Step 3 : Now you can select the target partition and change drive letter for it. And here are two ways you can choose. Way 1.

You can type the following commands one by one in diskpart. Way 2. Alternatively, you can type the following commands one by one. This way is relatively easier than the first way. Step 4 : Input exit and press Enter. You can also click the Close button from the upper right corner to exit Command Prompt. As you can see, it might take you more time to change drive letter on Windows 11 via Command Prompt. The last method to change drive letter on Windows 11 is to use a reliable third-party tool and here I recommend MiniTool Partition Wizard.

It is a professional disk manager that can be used to create, move, resize, delete, format partitions, recover lost files , check and repair hard drive errors , etc. A huge number of its features are free to use, including Change Letter. Step 1 : Download MiniTool Partition Wizard by clicking the following button or visiting its official website. Then install and launch it. Step 2 : When you get the main interface of MiniTool Partition Wizard, right-click the partition where you need to change drive letter.

In the pop-up menu, select Change Letter. Step 4 : When you go back to the main interface, click Apply to execute the pending changes. How to change drive letter on Windows 11? Here are the top 4 methods. Diskpart is a built-in tool that you can use to manage your hard drive, like format disk partition , create partition, delete partition , etc.

Step 1. To use a command line, you need to open the command line first. Step 2. Type list volume and press Enter. Here you should know the number of the simple volume whose drive letter you want to assign, change, or remove. Step 3. Select volume n and press Enter. Here you can select the volume whose drive letter you want to assign, change, or remove. Step 4. Therefore, you have already assigned, changed, or removed a drive letter.

And you can type list volume to see the details.