Dvp nc615 manual

The Data Precision digital multimeter is suitable for this job. The "limit" indication is 0. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. See Fig. A Unleaded solder Boards requiring use of unleaded solder are printed with the lead- free mark LF indicating the solder contains no lead.

Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Caution: The printed pattern copper foil may peel away if the heated tip is applied for too long, so be careful! To Exposed Metal Parts on Set 0.

Using an AC voltmeter to check AC leakage. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Wow and flutter: Less than detected value. When you play PCM.

See page for further information. Specifications and design are subject to. Corporation has determined that this product. Canadian, Asian, Oceanian models. After correcting the original service problem, perform the following.

Check the area of your repair for unsoldered or poorly-soldered. Check the entire board surface for solder splashes. Check the interboard wiring to ensure that no wires are. Look for unauthorized replacement parts, particularly. Look for parts which, though functioning, show obvious signs. Page Additional Operations be connected to the digital jack of the player. Note You may not be able to use the Replay function with some scenes. When you play DVDs that allow you to select items such as the language for the subtitles and the language for the sound, select these You cannot play still pictures such as a menu.

The display for programming appears. As titles and tracks are assigned unique numbers on the disc, you can select the desired one by entering its number. Page 45 Checking the information on the front panel display You can view the time information and text displayed on the TV screen also on the front panel display.

The information on the front panel display changes as follows when you change the time information on your TV screen. If the DVD is recorded with multilingual tracks, you can also change the language.

Refer to the following explanations given for each item. This means that you can change the viewing angle. The number of the angle appears on the display. Note Depending on the DVD, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to turn them off. Note Depending on the disc or the scene being played, noise found in the disc may become more apparent.

If you have not entered a password The display for registering a new password appears. The display for entering your password appears. The player starts playback. Number buttons You can control your TV using the buttons below. You can also set a language for the subtitles and the Setup Display, among other things. The on-screen displays differ depending on the player model. The setting is selected and setup is complete. The default settings are underlined. AUTO The picture, including subjects that move dynamically, is output with no jitter.

Normally select this position. Select this when the player is connected to an audio component lacking a built-in MPEG decoder. Page Additional Information Should any problem persist, consult your nearest Sony dealer.

Power The power is not turned on. Page 69 The disc does not play. Laser: Semiconductor laser Signal format system:. Harmonic distortion: 0.

Wow and flutter: Less than detected value. Mass approx. Specifications and design are subject to change without notice. Corporation has determined that this product meets the. After correcting the original service problem, perform the following. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors.

Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.